Installation Guide

Substrate

The surface must be clean, being free of any dust, oil, mould, moss or other contaminents.

Application

The product is applied without any dilution, using either a brush, a roller, or by airless spraying.

Freezteq AG-10 should be applied on a dry surface in two layers. The second layer should be applied 4-8 hours after the first one, depending on the ambient temperature and humidity. Freezteq AG-10 must not be applied during times of rain.

If a structure is subject to graffiti on a surface that has been treated with Freezteq AG-10, removal of the unwanted graffiti will invariably remove the original treatment, and therefore a further two coats will need to be re-applied.